Listings
Results 1 - 6 of 6
Pressure drop test set, 200 mbar Testing pump, greater than 500 mbar Single-pipe counter cap Two-valve T-fitting Single-valve barrier Connection hose LW Conical test plugs 1/2" and 3/4" High pressure stage stop 3/8", 1/2", 3/4", and 1" Leak detection spra ...
Precision manometer up to 40/200 hPa, DVGW approval, incl. alarm display, battery and calibration protocol DVGW approval Switchable precision range with a high resolution Printout of data incl. softwa ...
ProductdescriptionThe testo 312-2 and 3 manometers are DVGW approved and correspond to TRGI for all pressure adjustments and pressure inspections on gas heating boilers. Use the testo 312-2 precision manometer to check flue gas draught, differenti ...
Technical DataLCD, 2 lines Storage temperature -20 to +60 °C Operating temperature +5 to +45 °C Battery type 9V block battery Weight 300 g Dimensions 215 ...
Versatile pressure meter up to 300/6000 hPa, DVGW approval, incl. alarm display, battery and calibration protocol DVGW tested Switchable precision measuring ranges with high resolution Fast reporting of ...
Productdescriptiontesto 312-3, the versatile manometer for the pre-test and main test on gas and water pipelines up to 6 bar. Pressure changes caused by changes in temperature during the measurement are balanced out by the temperature compensation ...
Technical DataOperating temperature +5 to +45 °C Battery type 9V block battery Weight 300 g ...
testo 312-4 differential pressure meter incl. battery and calibration protocol Gas-tightness and serviceability test by pressure drop on gas pipes according to DVGW-TRGI 2008 Load test on gas pipes according to DVGW-TRGI ...
ProductdescriptionA measuring instrument for carrying out all necessary tests on gas heaters and pipes as well as water pipes. Inherently safe thanks to the use of C-Flex hoses with high impermeability. Legally compliant measurement procedure for ...
Technical DataMemory Approx. 25.000 readings Weight Approx. 600 g Dimensions 219 x 68 x 50 mm ...
Pressure meter with built-printer, from -1000 mbar to +1000 mbar Fast measurement of amount of gas leaking according to DVGW-TRGI 2008 VP 952 Load and gas-tightness test on gas pipes Pressure test on waste water pipes according to DIN EN ...
ProductdescriptionExact measurement of pressure tightness and leak-proofness of gas and water systems. testo 314 compensates pressure fluctuations to the desired normal test pressure, measurement inaccuracies are thus eliminated. The most common p ...
Technical DataBattery life > 5 h Weight Approx. 728 g Dimensions 252 x 115 x 58 mm ...
testo 510 handy measuring instrument for differential pressure incl. protection cap, batteries and calibration protocol Display in Pascal possible over entire measurement range Accuracy: ±0.03 hPa (0 to 0.30 hPa) / ±0. ...
Productdescriptiontesto 510's differential pressure measurement is temperature-compensated for more accurate readings. The readings can be displayed in Pascal over the whole measurement range. Magnets on the back of the instrument allow you to wor ...
Technical DataStorage temperature -40 to +70 °C Operating temperature 0 to +50 °C Battery type 2 batteries Type AAA Battery life 50 h Weight 90 g Dimensions ...
